Devlog

The sensor moves into its real box

Hardware

A render of the FlagFox sensor in its enclosure: the fox and wordmark on a navy face, a CLEAR button and a status light.

The first sensors were long test boards. The second board is the real shape: small enough for an off-the-shelf enclosure, two AAA cells, one button and one light, laid out around the box rather than the other way round.

Getting the cells right took a second look. The 3D model of the battery spring from the parts library didn’t match the maker’s own drawing, so our fit checks had been measuring the wrong spring. Working from the drawings instead showed the gap between the contacts was tighter than the spring wanted. We moved the springs out before ordering, as far as the board edge allowed.

Five boards came back. There’s no USB port on this one, so firmware goes on through six small pads on the back. We printed a jig that holds spring pins against them, and all five sensors took their firmware through it on October 19.

The picture is a render, not a photo. Photos come when they’re in the field.